Reset

OSHA #511 General Industry (Prerequisite for 501) - Offered through Southeastern OTI Education Center - READ FULL DESCRIPTION BEFORE REGISTERING

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/20/2020 at 08:00 AM

Ends : 10/23/2020 at 05:00 PM

Course Description

Member: $825

Register

4 Days, 30 Instructional Hours
30 MESH Hours (Manager of Environmental Safety and Health)
30 PDHs (Professional Development Hours for Engineers)

This course is eligible for credit towards OSHA’s Public Sector Certificate.

About This Course:
This course covers OSHA policies, procedures, and standards, as well as general industry safety and health principles. A copy of the 29 CFR 1910 General Industry Standards is included with the registration fee. Participants must successfully pass a written exam at the end of the course.

For those interested in becoming authorized to teach 10hr and 30hr OSHA Outreach classes, the OSHA #511 course meets one of two prerequisites for the OSHA #501 Trainer Course for General Industry. Please note, the 30-hour General Industry OSHA outreach class is not considered equivalent to OSHA #511.

Recommended for:
Environmental, safety and health managers and employees, plant and facility engineers, maintenance staff, individuals new to the field, experienced environmental safety and health managers looking to expand their knowledge.

Participants will:
Describe requirements in the OSHA 29 CFR 1910 standards that protect workers from common hazards in general industry workplaces.
 

Topics Include:
  • Introduction to OSHA
  • How to Read OSHA Regulations
  • Inspections and Penalties
  • Recordkeeping
  • Hazard Communication
  • Confined Spaces
  • Means of Egress
  • Fire Protection
  • Walking and Working Surfaces
  • Electrical Safety
  • Lockout/Tagout
  • Machine Guarding
  • Personal Protective Equipment
  • Hazardous Materials
  • Powered Industrial Trucks
  • Materials Handling and Storage
  • Welding, Cutting, and Brazing

Alive at 25

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/21/2020 at 04:00 PM

Ends : 10/21/2020 at 08:30 PM

Course Description

Non-Member: $40

Register

Alive at 25 focuses on behaviors and decision-making young drivers are faced with behind the wheel. The course is instructed by law enforcement officers and first responders, and curriculum includes activities, videos, case studies, personal stories from instructors, and problem solving that allows participants to form their own conclusions regarding their behavior.

Alive at 25 is a 4.5 hour, single session class. Arrive at least 10-15 minutes prior to class start time to find the classroom and check-in. High school locations will have signage or a representative at the main entrance to direct students to the classroom. Food and beverage is not provided, but students are welcome to bring their own snacks and drinks for breaks.

To register – select a session, create an account, and checkout by paying the course fee with a credit or debit card.

Walk-in registrations will not be accepted.

If you have any questions, concerns or special needs, email us or call (800) 733-6185.

8-Hour Defensive Driving

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/24/2020 at 09:00 AM

Ends : 10/24/2020 at 05:00 PM

Course Description

Non-Member: $89

Register

OSHA #7845 Recordkeeping Rule Seminar - offered in conjunction with SEOTI (OSHA 510 and OSHA 511 also required.) READ FULL DESCRIPTION BEFORE REGISTERING

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/27/2020 at 08:00 AM

Ends : 10/27/2020 at 05:00 PM

Course Description

Member: $275

Register

1 Day, 7.5 Instructional Hours
7.5 MESH Hours (Manager of Environmental Safety and Health)
7.5 PDHs (Professional Development Hours for Engineers)

This course is eligible for credit towards OSHA’s Public Sector Certificate.

 

CLICK HERE TO REGISTER

 

About This Course:
This course is designed to assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records of illnesses and injuries and reporting specific cases to OSHA.

 

Recommended for:
Small business owners and leaders, personnel responsible for safety and OSHA recordkeeping, and Human Resources professionals responsible for OSHA recordkeeping.

 

Participants will:
  • Identify OSHA recording and reporting requirements
  • Complete OSHA’s Injury and Illness Recordkeeping forms 300, 300A and 301
Topics include:
  • Purpose and Scope of OSHA Recordkeeping
  • OSHA’s Recording Criteria
  • OSHA Injury and Illness Recordkeeping Forms
  • Posting of Safety and Recordkeeping forms
  • Reporting of Fatalities and Multiple Hospitalizations

Additional Information:
Employers who are required to keep Illness and Injury records must post their annual summary (OSHA Form 300A) each year from February 1 – April 30.

OSHA #7215 - Silica in Construction, Maritime, General Industry

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/28/2020 at 08:00 AM

Ends : 10/28/2020 at 05:00 PM

Course Description

Member: $275

Register

Course Details:

1 Day, 7.5 Instructional Hours

7.5 MESH Hours (Manager of Environmental Safety and Health)

7.5 PDHs (Professional Development Hours for Engineers)

About This Event:

This course covers the development and implementation of controls and strategies to prevent or mitigate silica exposures in construction, maritime, and general industries.

Recommended for:

Anyone in any industry that has exposure to, works with, or supervises workers with potential exposure to respirable crystalline silica.

Topics Include:

Review of OSHA’s respirable crystalline silica standards in the construction, maritime and general industries

Effects of silica exposure

Control methods to minimize silica exposure

Participants Will:

Describe the requirements of OSHA’s respirable crystalline silica standards

Recognize the hazards and risks associated with silica

Identify assessment options and exposure control measures associated with silica exposure.

Basic Work Zone

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/29/2020 at 09:00 AM

Ends : 10/29/2020 at 04:00 PM

Course Description

Member: $145

Register

Non-Member: $175

Register

Controlling traffic through work areas is one of the most important -- and dangerous -- operations in construction maintenance. The Basic Work Zone course is an introduction to work zone set up, focusing on specific requirements from the MUTCD and the SCDOT Standard Drawings/SCDOT Work Zone Safety Handbook. Who should attend? Individuals with safety and health responsibilities in highway and street construction; bridge, tunnel, water or sewer construction; concrete, utilities, or paving industries; state transportation, and county or municipal street/public works departments. The course covers: • How to recognize and utilize the federal guidelines in The Manual on Uniform Traffic Control Devices (MUTCD) • How to recognize the parts of a temporary traffic control zone • The different types of tapers and how to set them up • The different types of temporary traffic control devices and how to set up basic work zones based on the MUTCD and SCDOT guidelines • Mobile Operations MUTCD and SCDOT requirements • Flagging Operations MUTCD and SCDOT requirements • Worker Safety requirements Attendees participate in tabletop exercises to practice setting up temporary work zones. Previous Work Zone Experience is NOT Required to attend this course. Completion of the course and passing exam grade are required for a certificate of completion. This is an 8-hour course.

Temporary Traffic Control Supervisor (REFRESHER) (Required every 5 years)

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 10/30/2020 at 09:00 AM

Ends : 10/30/2020 at 04:00 PM

Course Description

Member: $195

Register

Non-Member: $215

Register

This 6 Hour temporary traffic control supervisor training refresher course is designed for the supervisors who have previously completed the Temporary Traffic Control Design and Supervision Course. This course complies with the Manual on Uniform Traffic Control Devices (MUTCD), and will review how to utilize the MUTCD, and the SCDOT Standard Specifications and Drawings. This course will review how to interpret, implement and verify accuracy of a traffic control plan. This course meets the SCDOT requirements for a refresher course every 5 years. Successful completion of this refresher course will require acquisition of a passing grade on the final written exam. • Proof will be required of previous completion of a Temporary Traffic Control Class by an SCDOT approved entity.

Alive at 25

Southeastern Technical College Wrightsville, GA

Starts : 10/31/2020 at 09:00 AM

Ends : 10/31/2020 at 01:30 PM

Course Description

Non-Member: $40

Register

Alive at 25 focuses on behaviors and decision-making young drivers are faced with behind the wheel. The course is instructed by law enforcement officers and first responders, and curriculum includes activities, videos, case studies, personal stories from instructors, and problem solving that allows participants to form their own conclusions regarding their behavior.

Alive at 25 is a 4.5 hour, single session class. Arrive at least 10-15 minutes prior to class start time to find the classroom and check-in. High school locations will have signage or a representative at the main entrance to direct students to the classroom. Food and beverage is not provided, but students are welcome to bring their own snacks and drinks for breaks.

To register – select a session, create an account, and checkout by paying the course fee with a credit or debit card.

Walk-in registrations will not be accepted.

If you have any questions, concerns or special needs, email us or call (800) 733-6185.

Alive at 25

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 11/07/2020 at 09:00 AM

Ends : 11/07/2020 at 01:30 PM

Course Description

Non-Member: $40

Register

Alive at 25 focuses on behaviors and decision-making young drivers are faced with behind the wheel. The course is instructed by law enforcement officers and first responders, and curriculum includes activities, videos, case studies, personal stories from instructors, and problem solving that allows participants to form their own conclusions regarding their behavior.

Alive at 25 is a 4.5 hour, single session class. Arrive at least 10-15 minutes prior to class start time to find the classroom and check-in. High school locations will have signage or a representative at the main entrance to direct students to the classroom. Food and beverage is not provided, but students are welcome to bring their own snacks and drinks for breaks.

To register – select a session, create an account, and checkout by paying the course fee with a credit or debit card.

Walk-in registrations will not be accepted.

If you have any questions, concerns or special needs, email us or call (800) 733-6185.

OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry - offered in conjunction with SEOTI - READ FULL DESCRIPTION BEFORE REGISTERING.

Southeastern Chapter National Safety Council Training Facility Irmo, SC

Starts : 11/10/2020 at 08:00 AM

Ends : 11/13/2020 at 05:00 PM

Course Description

Member: $825

Register

Course Details:

4 Days, 30 Instructional Hours
30 MESHHours (Manager of Environmental Safety and Health)
30 PDHs (Professional Development Hours for Engineers)

About This Course:

Successful completion of this course results in participants becoming OSHA-authorized trainers in OSHA’s Outreach Training Program.Authorized trainers can conduct both 10-hour and 30-hour general industry classes that provide training to workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces along with information regarding workers’ rights, employer responsibilities, and how to file a workplace safety complaint. OSHA-authorized trainers are able to issue 10 and 30-hour course completion cards to participants.
During the course, students will work with a partner to develop a presentation and teach an assigned OSHA General Industry Outreach topic, and successfully pass a written exam. Participants will be provided with a variety of training materials and resources.


Prerequisites:

1) OSHA #511 Occupational Safety and Health Standards for General Industry

(Please note, the 30-hour General Industry OSHA outreach class is not considered equivalent to OSHA #511. Also, this course must have been completed in the last 7 years. If you completed the course longer than 7 years ago, then you will need to retake it in order to qualify.)

2) Five (5) years of general industry safety experience


3) A completed and signed Prerequisite Verification Form and a copy of the OSHA #511 certificate (standards course completed no longer than 7 years ago) must be uploaded to your account in REPORTER in order to confirm eligibility for this class. If you have questions about your eligibility, please email OTIprerequisite@ncsu.edu.


Download the Prerequisite Verification Form


Previously-authorized OSHA Outreach Trainers for the General Industry whose status has expired outside the 90-day grace period window must now submit the same prerequisites as participants who want to become a new trainer.


Recommended for:
Experienced safety professionals interested in teaching the OSHA 10 and 30-hour general industry safety and health outreach program to their employees and/or other interested groups.
Participants will:
- Apply adult learning principles and training techniques.
- Identify, define, and explain general industry hazards and acceptable corrective measures in accordance with the 29 CFR 1910 OSHA General Industry Regulations.
- Teach 10-hour and 30-hour General Industry courses.
Topics Include:
- OSHA Outreach Training Program Requirements and Procedures
- Adult Education Principles
- Writing Learning Objectives
- Developing Training Content
- Use of Multimedia in Presentations
- Training Methods and Techniques
- Resources for Safety Training
Additional Information:
Authorized OSHA Outreach Trainers are required to attend OSHA #503 Update for General Industry Outreach Trainersonce every four (4) years to maintain their trainer status.